BTBNJ - BR-315 B EPOXY ADHESIVE

  • MSDS: BTBNJ
  • Manufacturer: BURKE INDUSTRIES
  • Product Name: BR-315 B EPOXY ADHESIVE
  • National Stock Number: 8040-00F033031
Product Identification

Product ID:BR-315 B EPOXY ADHESIVE
MSDS Date:10/22/1991
FSC:8040
NIIN:00F033031
MSDS Number: BTBNJ

Responsible Party
BURKE INDUSTRIES
2250 S 10TH ST
SAN JOSE, CA 95112
US

Emergency Phone: 408-297-3500

Info Phone: 408-297-3500

Cage: 96780

Contractor
BURKE INDUSTRIES
190 SAN JOSE, CA 95103 US

Telephone: 408-297-3500

Cage: 96780

Ingredients

TRIETHYLENETETRAMINE, EPOXY HARDNER

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 45-60%


ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5-15%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM


220 G/L-223 G/L

RTECS: 9999999VO

Fraction By Weight: 8-20%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE, THROAT IRRITATION.
IF INHALE MAY BE HARMFUL/FATAL. SKIN: IRRITATION/DERMATITS. SKIN:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: REPORTS HAVE ASSOCIATED REPEATED &
PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS W/PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR & APPLY ARTIFICIAL
RESPIRATION IF NEEDED. EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS.
INGESTION: IF VICTIM IS CONSCIOUS, INDUCE VOMITING & GIVE
WATER/MILK TO DRINK. DON' T GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. SKIN: WASH THOROUGHLY W/SOAP & WATER/HAND
CLEANER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:54F
Lower Limits:2.0
Extinguishing Media:WATER FOG, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA
Unusual Fire/Explosion Hazard:VAPORS ARE FLAMMABLE IF ALLOWED TO
COLLECT & CONCENTRATE. CLOSED CONTAINERS MAY DEVELOP EXCESSIVE
PRESSURE & ERUPT WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE OR EXTINGUISH ALL SOURCES OF IGNITION
IN THE AREA, INCLUDING EQUIPMENT WHICH MAY SPARK. SCOOP MATERIAL
INTO APPROVED DOT CONTAINER. REMOVE TO SAFE PLACE WHERE MATERIAL
CAN DRY.

Handling

Handling and Storage Precautions:STORE AT TEMPERATURES BETWEEN 60 F &
90 DEGREES F. KEEP AWAY FROM HEAT, SPARKS, FLAMES & ALL SOURCES OF
IGNITION.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALINGTHE CONTENTS MAY BEHARMFUL OR FATAL.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATORY EQUIPMENT
Ventilation:PROPER VENTILATION NORMALLY SUFFICIENT.
Protective Gloves:IMPERVIOUS, RUBBER, LEATHER
Eye Protection:GLASSES
Work Hygienic Practices:WASH SKIN THOROUGHLY W/SOAP & WATER/HAND
CLEANER.
Supplemental Safety and Health
KEEP OUT OF REACH OF CHILDREN.

Chemical Properties

Boiling Pt:B.P. Text:150-250F
Vapor Pres:32
Vapor Density:>1
Spec Gravity:1.59
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:HEAVY EPOXY RESIN PASTE W/ALCOHOL ODOR

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, ALL OTHER
SOURCES OF IGNITION.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. DO NOT FLUSH ADHESIVE DOWN DRAINS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.